The production capacity of plastic mill is affected by the following factors:
1, the humidity of the material, if the moisture content of the material is large, the material is easy to stick in the plastic mill, but also easy to block in the process of feeding, resulting in reduced grinding capacity.
2, the hardness of the material, the harder the material grinding is more difficult, and the wear of the equipment is more serious. Grinding speed is slow, of course, grinding capacity is small.
3, the viscosity of materials. That is, the greater the viscosity of the material, the easier it is to adhere.
4, the fineness of the material after grinding, fineness requirements are high, that is, the finer the material out of the grinding is required, the smaller the grinding capacity is.
5. The better the wear resistance of the grinding parts of the plastic grinding machine (hammer and jaw plate), the greater the grinding capacity, if not wear-resistant, will affect the grinding capacity
6, the composition of the material, the more the powder in the material before grinding, the more the influence of the powder, because these fine powder is easy to adhere to affect the transmission. For fine powder content should be in advance of a sieve